Installation manual

The second level or Actions Keys selects the action to be performed
once the Control Key is selected, for example “Press 0 for OFF, 1 for
ON, 2 for Low, 3 for High”.
The Control Menu is as follows:
Enter Control Key
Enter control key 0 to 9. This selects the digit on the telephone keypad
for Home control. These control settings program the assignment of
digits on the telephone keypad with the descriptions e.g. Digit 1 for
"Living Room Lights", the control action description (e.g. "on", "off")
and the Control response required to perform the action.
When the action code is selected, the system says the Description for
the selected digit, e.g.
Living Room Lights ,
Press 1 for Description,
2 for Action Key
Description (3,1,1)
e.g.
Living Room Lights - enter word number and # key
Enter word number from the Word List (Table 1.). A maximum of 4
words is allowed. If less than 4 words are required, end with 255 # or
0#
Control Action Key (3,1,2)
The Action Key refers to the assignment of digits on the telephone
keypad to a word description of the action e.g. 1 for "on" and 0 for
"off" and the Response required to perform the action.
Select Control Action Key - press 0 to 9
Select which key to assign to the action for the appliance.
Control Action Words (3,1,2,1)
Up to 3 Action words can be entered to describe the actions to take
place by selecting this Action key
When digit 0 to 9 is pressed, the voice menu says e.g.
On
Enter Word number and # key
Comfort Installation Manual
110