Installation manual

Alarm (2)
Enter Alarm Type and # key (0-31)
Up to 32 Alarm Types can be selected. (See Alarm Types in Table 4).
This menu allows the Dial settings, Alarm Response, Siren Types,
Communicator Report Codes and other settings for the selected Alarm
type to be changed.
(Alarm Name)
Press 1 for Dial Settings
2 for Response
3 for Description
4 for Strobe
5 for Siren Type
7 for Trouble Arm Option
8 for Alarm State
Dial Settings (2,1)
Dial Settings On (Off)
Press 1 for on, 0 for off.
For each alarm type, the dial out setting can be enabled or disabled. If
the dial setting is on, i.e. 1, the system will dialout to the assigned
numbers in the event of this alarm occurring. If the dial setting is 0
(off), no dialout will be made.
When the dial setting is set to ON, the following sub-menu is heard
Press 1 for Dial Settings
2 for Dial Delay
3 for Alarm Report Code
4 for Alarm Restore Code
6 for Monitoring Station Code
Dial Settings (2,1,1)
Up to 8 numbers can be dialled in the event of alarm activation. Any
combination of the 8 phone numbers can be selected for dial out for
each Alarm Type. If the dial setting is ON, the voice menu will say the
Phone Indexes (1 to 8) of each phone index selected. For example,
"Dial Setting 1,3,6,7" means dial out will be made to the numbers
programmed in Phone Indexes 1,3,6,7 whenever this Alarm Type is
activated.
Comfort Installation Manual
105