Installation manual

Does the system remain armed after removal of power?
After a complete loss of power, including battery discharge, the system
remembers its last state and restores it. If the system was armed to
Away, Night or Day mode, it will re-arm to that mode when powered up
again. The Date and Time will be reset to default after a complete
power loss, and will need to be reprogrammed.
Can Announcements be disabled on certain keypads?
Yes, go to the keypad for which announcements are to be disabled, and
go to Program Menu 3,1. Press 1 to enable announcements, 0 to
disabled them on that keypad alone. This is also described in the
User Manual.
Can Comfort be Partitioned?
Comfort does not have any partitioning feature, where the system can
be subdivided into two or more independent partitions, able to be
armed and disarmed independently. However, it is possible to use the
OMIT action (from v4.96) to bypass a group of zones (programmed as
immediate in all modes) usually using a keyswitch or a stand-alone
access control keypad to achieve a similar function. Refer to the
Application Manual for the programming and setup.
Comfort Installation Manual
101