Operating instructions

8
acoustic signals:
a short beep : You have pressed a button.
a long beep: The radio link between base station and cordless handset
has been interrupted or there is a malfunction.
two beeps: You have hung up the cordless handset on the base station.
three beeps: If you have selected a function, the bleeps remind
you to continue the programming procedure.
m
to store a telephone number (maximum of 10) / to call u p
a telephone book entry.
g
for taking your cordless handset off the hook and hanging it up
again.
k
to redial the last number called on the cordless handset
q
to store and call up a number which should be dialled in an
emergency.
i
to play back waiting music / transfer to another cordless handset
o
to select a function / to confirm a selection / to leave a func-
tion / to change the settings when using an extension
r
to adjust the volume of the loudspeaker
Display
c
if c is lit, the battery is charged / the symbol c starts to
blink when the battery runs low / if the symbol e appears,
the battery is low
t
appears in the display when you have pressed the o but-
ton in order to programme your cordless handset
m
appears when you are using the telephone book of your cordless
handset
g
The g symbol blinks when you receive a telephone call /
g appears when an internal call is in progress
i
the i symbol blinks when an internal call has been trans-
ferred to the cordless handset / i lights up when the cordless
handset is logged on to the base station of your fax and is within
range of the base station
s
if the s symbol appears the cordless telephone is logged to
the base station and is in range of the base station / if the s
symbol blinks, the cordless handset is not logged on to the
base station / the s symbol does not appear if the cordless
handset is out of range of the base station or the base station
has been cut off from the power supply
Location of controls for
cordless handset