Operating instructions

37
Störungen
Care and maintenance
instructions
! Before opening the fax machine, make sure that you
are electrically discharged by e.g. touching the metal
housing of a grounded appliance, a water pipe or
radiator.
! Use a soft, fluff-free cloth lightly moistened with a
little alcohol (96%). You can also use a special cloth
for cleaning fax machines, which is available on the
market. Do not allow any moisture to penetrate
inside the device.
Clean the scanner glass
1 Carefully remove the scanner by pulling it upwards on both
sides.
2 Place the scanner in front of you with the scanning glass
surface face up.
3 Gently wipe the glass surface with a soft cloth (A).
4 Before you re-install the scanner, also wipe the scanner
compartment.
Clean the printer roller
If the paper feed mechanism contains paper please remove it.
1 Open the operation panel by carefully lifting it upwards at
the recess in the middle.
2 Using a cloth as described above, wipe the printer roller (A).
To clean the entire roller turn the roller by hand.
3 When cleaning is complete close the operation panel.
! Do not use the fax cleaners available on the market
which are drawn through the machine automatically.
By doing so you can damage your fax machine!