Operating instructions

36
Logging on and off to the
base station
If the s symbol on your cordless handset blinks after connec-
tion it is not logged on to the fax machine. In order to log it on,
or if you wish to log on additional cordless handsets to the fax,
you must again enter the code on the receiver of the fax machine
in the cordless handset.
Logging on
1 Unplug your fax from the mains and plug it back in again.
2 Press o and 4.
3 Enter the code of the cordless handset. The code is on the
receiver on the paper holder.
4 Press o.
Logging off onr handset
1 Unplug your fax from the mains and plug it back in again.
2 Press o and 5.
3 Enter the code of the cordless handset.
4 Press o again.
Logging off other handsets
1 Unplug your fax from the mains and plug it back in again.
2 Press o and 6.
3 Enter the code of the other cordless handset and confirm
with o.
If you also wish to use cordless handsets from other
manufacturers, please refer to the instructions for use for
this cordless handset.
Service code
! Only use this function when absolutely necessary. If
you are satisfied with your changes to the factory
settings you should not use this function.
Function 45 (Service code) is used to delete some or all of your
changes to the factory settings. This function enables you to
partially or fully reconfigure your device. It is especially helpful if
you have modified settings but find that your fax machine does
not respond as expected.
After deleting some or all of your custom settings please rerun
EASY INSTALL.
The following codes are at your disposal:
Code No. 7117
This will delete all the settings you have altered on the fax machine.
Code No. 7140
If you enter this code all the settings and data you have entered in
the fax machine will be deleted, apart from the following:
• your personal outgoing message on your built-in answering
machine
• received messages
• stored short dial numbers
• stored telephone book numbers
• your name
• your telephone number
Example for using a service code:
1 Select MENU 45 and press OK. Enter the service code
(7117 or 7140). Press OK.
2 With </> you can select whether you really want to delete
your settings. Confirm with OK. Your fax machine will be
reset to its original configuration.