Operating instructions

15
Grundeinstellung
Language of display
1 For selecting the language of the display and the reports of
your fax machine, press MENU and numbers 1 and 1
and press OK.
2 Select the desired language with </> and confirm with
OK.
Type of ring signal
for the fax machine:
You can choose between ten different ring signals.
1 Enter function 44. Press MENU and numbers 4 and 4
and then OK.
2 Select the desired ring signal with 0 to 9.
3 Confirm your setting with OK.
for the cordless handset:
In addition to the number of rings of your fax machine, you can also
alter the number of rings of your associated cordless
telephone:
1 Press o and 1.
2 To select the desired ring signal, press one of the keys from
1 to 3 on your cordless handset.
3 Confirm your selection with o.
Volume of the ring signal
for the fax machine:
You can adjust the volume of the ring signal if the fax machine is
in stand-by mode or if it is just ringing. Please note that different
volumes can be set in S and M mode (see Fax switch).
1 By pressing </> the display shows the current setting for
about three seconds.
2 Change the volume by pressing </> until the desired
volume is achieved.
for the cordless handset:
1 Press o and 2.
2 Use one of the keys on your cordless handset to select one of
three different settings.
3 Confirm with o.
Volume of the loudspeaker
for the fax machine
1 You can adjust the volume of the loudspeaker at any time by
pressing l.
2 By pressing </> the display shows the current setting. If
you wish to adjust the displayed value, press </> until the
desired volume is achieved.
3 Finish your entry by pressing STOP.
Volume of the cordless handset
Using the r key, you can choose between three different settings (quiet
- medium - loud) on the cordless handset during a call.