Specifications

Repeater Guide 3 - 1
___________________________________________________________________________________
Chapter 3 Troubleshooting and Maintenance
SECTION 1TROUBLESHOOTING CHART
The following chart provides common problems and possible solutions.
Problem Try
There is a lot of static when calls hand-off
to the r
epeater.
and/or
The LED on the repeater won't stop
flashin
g.
Moving the repeater closer to the base.
Checking for interference from electronic
devices.
Making sure the repeater is not too close to
metal objects or thick walls.
Calls won't hand-off to the repeater. Making sure the repeater is inside the base's
goo
d signal range.
Making sure there is at least 35 feet between
re
peaters.
Resetting the repeater and registering it to the
base
again (refer to Chapter 2, 4.3 Registering
to a Different Base on page 2-5.)
I used to be able to connect to the base, but
now I
can't.
Making sure the repeater is powered on.
Resetting the repeater and registering it to the
base
again (refer to Chapter 2, 4.3 Registering
to a Different Base on page 2-5.)
When I'm on a call, the handset starts
b
eeping.
Turning off the verification tone (refer to
Section 2 Turning on the Verification Tone on
page 3-2).