User guide

Choosing settings for paper/envelopes
Your BT MultiJet 3000 default settings are suitable for printing most documents on plain paper.
To change your printer settings for printing on speciality papers, use the following table:
Paper/envelope Click printer Make the following selection
selection properties tab, then:
Envelopes Paper Scroll and click to select the appropriate envelope size.
Note: Many applications are designed to override the
envelope settings in Printer Properties.
Greeting cards, Document/Quality Click to select Greeting Card Stock.
index cards,
or postcards Paper
Select the appropriate Paper Size setting.
Photo, glossy or Document/Quality Click to select Glossy/Photo Paper.
coated papers Notes: • For the best possible photo quality, print with a photo
and colour cartridge combination in your printer.
• When printing photos, remove each photo as it exits from the printer
and allow it to dry before stacking.
Paper Select the appropriate Paper Size setting.
Sheets of custom- Paper Click to select Custom. Enter the dimensions for your custom paper size.
sized paper
Banner paper Paper
Click to select Banner or Banner A4.
Iron-On transfers Document/Quality Click to select Iron-On Transfer.
Note: We recommend printing on plain paper before
printing on the actual iron-on transfer.
Paper Select the appropriate Paper Size setting.
Transparencies Document/Quality Click to select Transparency.
Select Normal 600dpi or High 1200 dpi Print Quality.
Please note: When printing transparencies, remove each transparency
as it exits from the printer and allow it to dry before stacking.
Paper Select the appropriate Paper Size setting.