User guide

12.
• If you are not connected to a switchboard, click Next.
Or
• If your system is connected to a switchboard and you
have to dial an access code to get an outside line
(usually 9 ) enter it in the Preamble box.
If you need to dial a code number to charge the cost of
your fax messages to a different network service
provider, enter the code number here.
If you need a pause anywhere in the dialling prefix enter
‘&’ to give a pause of about one second.
• Click Next.
Please note
You can enter a forward slash ‘/’ at the start of a fax
number to ignore any prefix code you have entered.
13.
• Click Yes to automatically receive faxes directly into
your computer.
Please note
To receive faxes, your PC must be switched on with
Unimessage Pro running and it must be connected
to a telephone line.
You can use Routing Rules to automatically print
faxes on reception.