Operation Manual

Set the PABX access code
1. Press Menu then scroll to Handset and
press
OK.
2. Scroll to
PABX access code and press OK.
3. Display shows
Set Code . Press OK.
4. Enter your PABX access code and press Save.
5. Scroll to
ON and press OK.
6. Press and hold Back. to return to standby.
Entering a pause
A pause is entered when storing a number in the
phonebook (see
page 24) or PABX access code by
pressing and holding the button until the
display shows
P .
Recall
The (Recall) button is used when connected
to certain switchboards (PBXs) and with some BT
Calling Features, or equivalent services available
via your Network Provider.
R&TTE Directive
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment
Directive (1999/5/EC).
In demonstration with the Essential Requirement
for efficient use of the radio spectrum, the
product complies with EN301 406.
Hereby, Suncorp Technologies declares that this
BT Calypso is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
The Declaration of Conformance for the
BT Calypso is published on the website:
http://www.suncorptech.com/bt
BT accessories and
replacement items
For a full range of accessories and replacement
items for BT products please call 0870 240 5522,
or visit:
General information 83
BT Calypso 225 – Edition 03 – 20.10.05 – 6875
If you experience any problems, please call the Helpline on 0870 605 8047