Operation Manual
Additional handsets and bases
You can use up to five handsets with your BT Calypso
1100. To do this you need to register each additional
handset with the base following the simple steps given
below.
Each handset can be registered on up to four bases.
Register a BT Calypso handset to a base
1. On the base, press and hold until you hear two beeps.
You have 90 seconds to complete the following steps.
2. On the handset, press Menu, scroll to
Registration
,
then press OK.
Register Handset
is highlighted. Press OK.
3. The display shows the available base stations. A
against one of them indicates the handset is already
registered with that base.
4. If required, scroll to the base you want to register to
then press OK.
Enter the four-digit Security PIN (original setting = 0000)
and press OK. The handset registration is confirmed and
the handset is given a handset number (1 –5) which is
displayed.
5. Press and hold Back to return to standby.
36
BT Calypso 1100 – Edition 04 – 01.12.03 – 5766
IMPORTANT
Before registration, make sure the
handset batteries are fully charged
and that you are close to the base.
5766 Calypso 1100 UG [4] 01/12/03 11:09 Page 36