Operation Manual

Time settings
Set date and time
If you have subscribed to your network’s Caller Display
feature, the date and time will be set automatically when
you receive your first call. You can also set the date and
time manually.
1. Press Menu, scroll to
Time Settings and press OK.
2. Scroll to
Set Date & Time , then press OK.
3. Enter the date, e.g. 2708 = 27th August, then press OK.
4. Enter the time e.g. 1430 = 2.30pm, then press OK.
5. Press and hold Back to return to standby.
Set alarm
1. Press Menu, scroll to
Time Settings and press OK.
2.
Alarm is highlighted, press OK. Press OK again to select
On/Off .
3. Scroll or to highlight the option you want, then
press OK.
On Once – alarm sounds just once
On Daily – alarm sounds at the same time each day
Off – alarm off
33Base settings
BT Calypso 1100 – Edition 04 – 01.12.03 – 5766
If you make a mistake when
entering the date or time,
press Clear.
5766 Calypso 1100 UG [4] 01/12/03 11:09 Page 33