Owner`s manual

BT Versatility
Owner's Manual
60
Hot Line
Extensions can be programmed so that they automatically dial a number when they go off-hook.
The number dialled can be an extension or an external number.
To have an extension dial a number automatically, when the handset is lifted
• From the Programming Extension, press the PROGRAMME Key
• Press the Scroll Down Key (Ô) until ‘System programming’ is displayed.
• Select ‘System programming’.
• Enter the System Programming Password and select ‘Extensions’.
• Press the Scroll Down Key (Ô) until ‘Hot line’ is displayed.
• Select ‘Hot line’.
• Select the Extension from the Extension Menu.
• Enter the number to be dialled. If you wish to dial an external number, enter 9, or another
Line access code, before the external telephone number, to select a Line.
Press the Hands-free Key to finish programming.
Note: When a Featurephone is programmed as a Hot Line, only limited facilities can be invoked
after it is programmed. As soon as you go off-hook on the Featurephone, the number is dialled.
Note: A common application for the Hot Line feature is for a fax or modem. The extension can
be set to automatically select an exchange Line so the fax or modem does not have to dial 9.