User guide

52
If you experience any problems, please call the Helpline on 0870 240 3962* or email [e-mail]
Answering machine
Call screening
You can listen while your answering
machine takes a call. This lets you
identify the caller and decide whether
to take the call yourself. If you select
the Disable option, you will not be able
to use call screening.
Remote access on/off
You can prevent any remote access to
your messages by selecting the Disable
option. If you disable remote access,
any remot
e access PIN you have set is
deleted.
Remote access PIN
For added security, you can set a 4-
digit PIN code that has to be entered
before you can listen to your messages
from another phone. Keep a note of
your Remote Access Security PIN by
writing it in the space provided on
page 59.
If you select Disable. The Remote
Access Security PIN is reset to 0000.
Set on/off times
When the Answering Machine is
switched on, you can use the menu to
set your BT Paragon 650 to switch on
and off at preset times.
You can use one or two sets of on and
off time settings.
1. Press Menu. Display shows ANSWER MACHINE . Press OK.
2. Scroll to
ANSWER SETTINGS and press OK.
3. Display shows
ANSWER MODE . Press or to select
ANS & RECORD or ANSWER ONLY .
4. Press to select
OGM . Press or to select
FEMALE or MALE .
5. Press to select
ANSWER DELAY . Press or to select the
answer delay time – 0, 5, 10, 15, 20, 25, 30 or Time Saver.
6. Press to select
CALL SCREENING . Press or to select
ON or OFF .
7. Scroll to select
REMOTE ACCESS . Press or to select
ENABLE or DISABLE .
Press
Save to confirm.
If you select
DISABLE , the previous menu level is displayed.
If
ENABLED , select your Security PIN.
Enter the 4 digit Security PIN you want. Press
OK.
Enter the PIN again and press
OK. The display shows ENABLED
and returns to the main answering machine menu.