User guide

Page 53
• During power on press the 2 arrow keys on the front of your telephone at the same time
until the screen shown below is displayed.
• Select ¿ (Yes) for Network Parameters.
• Select # (No) until the following appears:
• Select ¿ (Yes) to Modify Static Values.
• Scroll down until ICP IP Address appears on your screen.
• Enter the ICP IP Address given to you by your system administrator (this will typically
be the WAN IP address of the BT Quantum System).
• Scroll until TFTP Address appears on your screen.
• Enter the value given to you by your system administrator (this will typically be the
WAN IP address of the BT Quantum System).
• Scroll until Store changes is shown and select ¿ (Yes).
• Scroll until Reboot now appears and select ¿ (Yes).
Your telephone is now ready to be used.