User guide

Page 52
4 Select Auto off time and enter the time at which parallel ringing is to be turned off, in
HHMM format.
5 Select Confirm.
Weekend service
You can turn parallel ringing of desk and mobile phones off over the weekend. To do so:
• Select the
⊗ key.
• Scroll and select FMC options.
• Select Weekend service.
Mobility Features Dialling Codes
To use the FMC functionality on BT 8528 systemphones, Q DECT telephones, Q phones
and compatible standard telephones, use the following codes:
• To send a call to the mobile Press (R) or (
) and dial 788 when on the call at the
desk or DECT telephone.
• To retrieve the call from the mobile dial 787 from the associated telephone.
• To turn the mobile ringing on and off dial 790.
• To set an automatic on time, dial 791 HHMM HHMM (the On and Off time). To cancel
the automatic on and off times dial 791¿.
• To turn Weekend Service on and off, dial 795.
Remote Teleworker
Remote Teleworker functionality is supported on some BT Quantum configurations.
When an ADSL line is equipped on the system, extensions can be programmed as Remote
Teleworker extensions and located on a site with access to the Internet. The remote
extensions must be BT 5330 or BT 5320 systemphones.
Once programmed and equipped these remote extensions, which are typically located at the
extension users’ homes, have access to all the functionality provided by the system.
You can set up a BT 5320 or BT 5330 IP systemphones as a remote teleworker extension.
To do so, your administrator must first use the web interface to configure the extension as
an IP phone. For instructions, refer the BT Quantum Administration Guide.
To programme the phone as a remote extension:
• Power on your IP phone.