User guide

Page 50
• If the extension is restricted from dialling the number, or if there is no line available,
you will hear a busy tone.
• If the call was answered, the display will show an A on the right-hand side of the
record. If the call was not answered, the A will not be displayed.
• An R displayed on the right-hand side of a record indicates that the number has
been redialled.
Mobility Features
BT Quantum includes features that support today’s mobile lifestyle:
• Fixed Mobile Convergence (FMC) allows you to switch between your desk and mobile
telephones while you are on a call.
• Remote Teleworker allows you to locate BT Quantum extensions at a remote site.
• Paired Extensions allows you to duplicate the number and functionality of your first
extension in a second location.
Combining your Desk and Mobile telephones (FMC)
Incoming calls to a number dedicated to your telephone, a Direct Dial In (DDI) number, can
be programmed to simultaneously ring your desk and your mobile telephone. Calls
answered on the desk telephone can be sent to the mobile.
Calls answered on the mobile telephone can be picked up at the desk telephone.
Calls answered on the mobile telephone can be transferred to any extension connected to
the system.
These features are available when ISDN and IP Trunks are used. They are not available on
standard analogue exchange lines. Refer to the BT Quantum Administration Guide for
programming instructions.
Sending Calls from the Desk Telephone to Mobile Phone
When a call ringing a desk and mobile telephone is answered on a BT 5330, BT 5320 or BT
8568 systemphone, the option Send to Mobile is presented on the display.
To send the call to your mobile telephone:
• Select Send to Mobile.
• A call is placed to the mobile telephone.
• Hang up your desk telephone when you hear ringing tone.