User guide

Help 
To change your Hub Manager’s password:
 once your BT Business Total Broadband service is set up, access your Hub
Manager by typing  or  in the address bar
of your web browser and pressing Enter or your return key
 click Settings at the top of the page, then Password
 you’ll be asked to enter the current password (your Hub’s default password is its
serial number)
 follow the on-screen instructions to set a new password

 

Even if BT Openzone is disabled, the subnet 10.x.x.x IP range settings remain.
We therefore suggest you use an alternative IP range or follow the steps below to
obtain the subnet 10.x.x.x IP range:
 unplug your broadband cable
 reset your Hub. To nd out how to do this, see page 55
 resetting your Hub means you also have to reset any changes
you’ve made to the Hub software. To see what such changes may include,
see page 55.
 access your Hub Manager by typing  or  in
the address bar of your web browser and pressing Enter or your return key
 click Settings, then LAN and Private Network
 change your LAN settings to use the subnet 10.x.x.x. IP range
 plug in your Broadband cable
Learn about… Set-up Extra features Help