User guide
Extra features
Enter the IP Address you wish to set the computer to (e.g. 217.37.237.65) and
the Subnet mask to 255.255.255.0, the Gateway to 217.37.237.78 and the
DNS Server to 217.37.237.78.
Renew the IP address of the computer as shown below. Your Hub automatically
detects the Static IP and removes the IP address from the public Static IP
DHCP pool.
Keep the computer in DHCP mode (i.e. obtain an IP address automatically).
Open your web browser, type (for your Hub Manager) in the
address bar and press Enter or your return key.
Select Settings, then LAN, followed by NAT & Address Allocation.
For the required device, select Public (select WAN IP Mapping) for Address
Assignment and Public Fixed: 217.37.237.73 for WAN IP Mapping.
Click Save before you close the window. You may be asked to enter your
password – if you haven’t changed it, the default password is the same as the
serial number on the side of your Hub.
Keep the computer in DHCP mode (i.e. obtain an IP address automatically).
Open your web browser, type (for your Hub Manager) in the
address bar and press Enter or your return key.
Select Settings, then LAN, followed by NAT & Address Allocation.
For the required device, select Public (select WAN IP Mapping) for Address
Assignment and Public from pool: 217.37.237.72 for WAN IP Mapping.
Click Save before you close the window. You may be asked to enter your
password – if you haven’t changed it, the default password is the same as the
serial number on the side of your Hub.
Learn about… Set-up Extra features Help