User guide

 Extra features

If you want to host a web site, you may have ordered multiple Static IP with your
BT Business Total Broadband service. If not, you can subscribe using 
at . Once you’ve installed your BT Business Hub,
please follow these steps to set up your multiple Static IP addresses:
 open your web browser, type  (for your Hub Manager) in the
address bar and press Enter or your return key
 click on the Broadband icon then Link Conguration
 scroll down to the Public IP Address section and select Enable
 in the Router Address eld, enter your BT Business Hub address (see ‘router
address’ in the ‘welcome’ emails or letters we sent when you ordered Static IP);
in the Subnet Mask eld, enter your subnet mask address as follows: if you have
5 Static IP addresses enter 255.255.255.248, if you have 13 Static IP addresses
enter 255.255.255.240
 click Save before you close the window. You may be asked to enter your password
– if you haven’t changed it, the default password is the same as the serial number
on the side of your Hub
 you’ll see a conrmation message that all’s okay
Once you’ve set up your multiple Static IP addresses, you can use one of the
following methods to assign your LAN computers to your public Static IP addresses
(supplied with your order for Static IP addresses).
If you need help with your computer settings, go to  for
PCs, or  for Macs, and search for ‘Change TCP/IP settings’.

 If your Hub’s address is 217.37.237.78 and the subnet mask is 255.255.255.240,
manually change the computer’s TCP/IP settings from Obtain an IP address
automatically to Use the following IP address and from Obtain DNS server
address automatically to Use the following DNS server addresses.
Learn about… Set-up Extra features Help