User guide

 Help
 click Settings at the top of the page, then Password
 you’ll be asked to enter the current password (i.e. your Fibre Hub’s serial number)
 follow the on-screen instructions to set a new password

 

Even if BT Openzone is disabled, the subnet 10.x.x.x IP range settings remain.
We therefore suggest you use an alternative IP range or follow the steps below to
obtain the subnet 10.x.x.x IP range:
 unplug your red broadband Ethernet cable
 reset your Fibre Hub. To nd out how to do this, see page 50
 resetting your Fibre Hub means you also have to reset any changes
you’ve made to the Fibre Hub software. To see what such changes may include,
see page 50.
 access your Fibre Hub Manager by typing  in the address bar of
your web browser and pressing Enter or your return key, or double-clicking the
icon on your desktop
 click Settings, then LAN and Private Network
 change your LAN settings to use the subnet 10.x.x.x. IP range
 plug in your Broadband cable
Learn about… Extra features Help Your Fibre Hub