User guide
Help
When you rst set up your new Fibre Hub, it automatically provides a basic level
of wireless protection. However, we suggest you increase your Fibre Hub’s level
of security.
You can do this, at no extra cost, by changing your Fibre Hub’s security from WEP
(Wired Equivalent Privacy) to WPA (Wi-Fi Protected Access).
To be able to switch to WPA, the devices that you want to connect to your Fibre
Hub must support WPA.
: some older wireless equipment may not support WPA.
We suggest you contact the manufacturer of your computer and devices to
check if they support WPA, and nd out if software updates are available
to enable them to use WPA.
To change your Fibre Hub’s security from WEP to WPA, please see the next question.
Type in the address bar of your web browser and press Enter or your
return key to access your Fibre Hub Manager. Then:
click on the Wireless icon – the Wireless Conguration screen will appear
under Wireless Security, select WPA-PSK for Authentication Type
for added security, you can set a customised encryption key (see bottom of the
web browser page)
click Submit. You may be asked to enter your password – if you haven’t changed
it, the default password is the same as the serial number on the bottom of your
Fibre Hub.
Learn about… Extra features Help Your Fibre Hub