User guide
Extra features
Select Settings, then LAN, followed by NAT & Address Allocation.
For the required device, select Public (select WAN IP Mapping) for Address
Assignment and Public from pool: 217.37.237.72 for WAN IP Mapping.
Click Save before you close the window. You may be asked to enter your
password – if you haven’t changed it, the default password is the same as the
serial number on the bottom of your Fibre Hub.
: each time you change these settings, you’ll need to:
1 click to save your new settings. You may be asked to enter your
password – if you haven’t changed it, the default password is the same
as the serial number on the bottom of your Fibre Hub
2 release and renew the IP address of the computer to allow it to receive the
new public Static IP address
To renew the IP address:
1 click the button, then select
2 type in the dialogue box, then click
3 an MS DOS window will appear – type in and press
4 you’ll see a number of lines of text and the prompt will appear again –
type in and press
5 your public Static IP addresses will be listed
6 when you’ve nished, close the MS DOS window
Your Fibre Hub’s rewall will continue to protect the computers assigned to the
public Static IP address. You may have to open specic ports if you plan to host
certain applications.
Learn about… Extra features Help Your Fibre Hub