User guide

12 About your Hub
Hub Manager
Your BT Business Hub 3 is like a computer. It has its own software running, which controls
how it works and what it does. You can change your Hub’s settings using your Hub
Manager – simply open your web browser and type http://btbusinesshub.home in the
address bar.
Access to your Hub Manager is secured using a password. When accessing the Hub
Manager for the first time, you’ll be asked to enter the Admin password – see your Hub’s
handy pull-out . You will then be asked to enter a new password of your choice. There’s
some space on page 23, if you’d like to write it down.
You can also enter a password hint that can help you remember your password when you
need it.
If you can’t remember your Admin password, you can use the Password Override feature.
When you’re in Hub Manager, press the Password Override button. Then press and hold the
WPS button for about 20 seconds and you’ll then need to enter the wireless key (see your
Hub’s pull-out) as the username, and the serial number (see under Hub) as the password.
You’ll then need to enter a new password as if you were accessing the Hub Manager for the
first time.
About your Hub
12345678
1234ABCD
1234abcdef
BTHub3-ABCD
+064422+1234567890
MAC 000111222333444
Example only