Operation Manual

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
BT Call Guardian 19
Personalise your announce message
You can personalise the BT Call Guardian greeting, by adding your name to
the Announce message.
1. Select
Menu, scroll to Call Control and press Select or .
2. Follow the instructions to set your PIN or enter your PIN and select
OK.
3.
BT Call Guardian is highlighted, press Select or .
4. Scroll to
Announce msg, press Select or .
5. Press
Select, or , on Record name and follow the voice prompt and press Save.
6. If you are happy with your recording, press
.
How do you accept, block or send a call to the answer phone?
1. BT Call Guardian answers a call for you and asks the caller to say (“announce”)
who they are.
2. Your BT8610 then rings you with the Announced call on the display and
announces the caller’s name when you pick up the phone. (e.g. “You have a
call from Mark”).
3. You now have the following choices :
• To accept the call, press 1
• To always accept their calls, press 2
• To block their calls, press 3 or press
• To send this call to the answer phone, press 4
• Or to ignore the call, just hang up (this call will then be sent straight to the
answer phone)