Audio Baby Monitor 400 User Guide
Welcome Thanks for buying a BT Baby Monitor. You'll soon be able to relax knowing you can listen for your baby's every gurgle, snuffle or cry. But first things first. To get set up, just follow the steps from page 7. Set-up only takes a few minutes. Then, you can learn all about your monitor and how to use it from page 11. Need some help? No problem – give us a call on 0800 145 6789*, or go to bt.com/producthelp. * Calls made from within the UK mainland are free.
Welcome • • • • • • • • Important safety information Your baby monitor is designed as just an aid. It isn’t a substitute for responsible and proper adult supervision. Make sure all cables and units are out of your baby’s reach – at least one metre away. Never cover either unit, put them in moist places or inside the cot, bed or playpen. If you travel abroad, check the voltage on your unit’s plugs match the local power output. Only use the batteries supplied for the Parent unit.
Contents Your Audio Baby Monitor 400 Help................................................. 14 Parent unit...........................................5 General information Baby unit.............................................6 Cleaning........................................... 16 Setting up Guarantee......................................... 16 Parent unit...........................................7 How to recycle your equipment......... 17 Baby unit.............................................
Your Audio Baby Monitor 400 Parent unit Power Press and hold to turn the unit on or off. Battery light Flashes if your battery is low, remains steady if your unit is charging. Volume down Turns the speaker down. Mute light Remains on when your Parent unit is on mute. Volume up Turns the speaker volume up. Mute Link HD Sound Link light Flashes when your monitor is trying to find a link. Remains solid when the Parent and Baby units are linked to each other.
Your Audio Baby Monitor 400 Baby unit Microphone Power on/off Press and hold to switch the power on or off. 6 Link Link indicator Flashes orange when your monitor is trying to find a link. Remains solid when the Parent and Baby units are linked to each other. Power socket (on the back) For connecting to the mains power socket using the power adapter cable supplied. Need some help? Call 0800 145 6789* or go to bt.
Setting up Parent unit 1. Plug one of the power cables into the socket on the back of the Parent unit. 2. Plug the other end of the cable into your mains wall socket and switch it on. 3. Activate the batteries by pulling the plastic tab away from the back of the Parent unit. Warning Only use the power adapters supplied. Using incorrect power adapters may permanently damage your product.
Setting up Taking out the batteries If you ever need to remove the batteries, slide open the battery compartment cover and use the ribbon to push them out. 4. Leave the batteries to charge for 16 hours to reach maximum charge. When they are fully charged the . battery icon on the display will show full charge Baby unit 1. Plug the remaining power cable into the socket on the back of the Baby unit. 2. Plug the other end of the cable into your mains wall socket and switch it on.
Setting up Switching on and linking the Parent and Baby units Before switching on, make sure the Parent and Baby unit are at least one metre from each other. Any closer and you might get audio feedback sounds. 1. Press and hold the button on the Baby unit until the orange Link indicator flashes. 2. Press and hold the button on the Parent unit until all the LEDs on the unit briefly light up. The orange Link indicator will flash and then will remain steady when the units have linked. 3.
Setting up • • • • 10 Important The two units will need to be linked before you can start using them. If the link between the units is broken, the Link indicator lights will flash while they try to look for each other. After 30 seconds, if the link is still broken, the Link indicator lights will flash red.
Using your Audio Baby Monitor 400 Switching on/off Switching the Baby unit on 1. Press and hold the button, the orange Link light flashes. When it’s finished linking, it’ll stop flashing and remain steady. 2. To switch off, press and hold the button again. Switching the Parent unit on 1. Press and hold the button on your Parent unit. The LED lights will flash. The orange Link light will also flicker on and off while the units are linking.
Using your Audio Baby Monitor 400 The unit has five volume levels plus Off (Mute). If you try to set the volume higher or lower than those, you’ll hear a beep. Changing the loudspeaker volume on your Parent unit You can change the volume using the and buttons. If you've muted the sound, the mute light will come on. List of tones Your Audio Baby Monitor 400 can produce various tones.
Using your Audio Baby Monitor 400 Resetting the units Resetting either units means they’ll return to the settings they came with. 1. Make sure the unit you’re resetting is switched off. 2. Switch it back on again by pressing and holding down . 3. Within four seconds of turning the power back on, press and hold the for at least a second. You should only reset if you’re having problems with your monitor. Need some help? Call 0800 145 6789* or go to bt.
Help If you have any problems setting up or using your baby monitor, see if these common questions can help. Why is the Parent unit beeping? Take a look at page 12 for a list of the tones the Parent unit makes. It could be beeping for a few different reasons. • The link has been lost between your units. Check that the Baby unit Link indicator is illuminated. If not, make sure the power adapter is still connected. • The batteries are low. See page 7.
Help Why aren’t the units linking? • Make sure the units are within range of one another. • Check if both units are turned on. What do I do if the battery is showing as low on the Parent unit? • Plug the unit into a wall power socket to charge it. It’s best to leave the unit plugged in whenever you can, to make sure the batteries are always charged. • To fully charge the batteries, the Parent unit should be on charge for about 16 hours if switched off and 24 hours if switched on.
General information Cleaning To clean, wipe with a damp cloth. Guarantee Your Audio Baby Monitor 400 is guaranteed for 12 months from the date you bought it. Subject to the terms listed below, the guarantee covers the repair of – or at BT’s or its agent’s discretion, the option to replace – the Audio Baby Monitor 400 or any part of it which is faulty or below standard, or as a result of inferior workmanship of materials.
General information How to recycle your equipment R&TTE Your baby monitor is classed as electrical or electronic equipment, so DO NOT put it in your normal rubbish bin. This product is intended for use within the UK. This equipment complies with the essential requirements for the Radio Equipment and Telecommunications Terminal Equipment Directive 1999/5/EC.
For a Better Future We’re always looking to make our products last longer and use less power, so we don’t have such a big impact on the environment. To find out about what we are doing, visit bt.com/betterfuture Free Technical Help & Support * 0800 145 6789 bt.com/producthelp Call us or go online if you have any difficulties with your product Offices worldwide © British Telecommunications plc 2016. Registered Office: 81 Newgate Street, London EC1A 7AJ. Registered in England No. 1800000. Printed in China.
