Specifications

BT-610 Manual Page 22 BT-610-9800 Rev A
5.9. Set Clock Screen
To set the date and time select SET CLOCK from the menu. Figure 22 shows the Set
Clock Screen and the following table describes the date and time formats.
SET CLOCK
DATE: 18 AUG’06
TIME: 11:25:36
Figure 22 – Set Clock Screen
Date / Time Formats
Date dd mmm’yy dd=day, mmm=month, yy=year
Time hh:mm:ss Hh=hours, mm=minutes, ss=seconds
5.10. Set Contrast Screen
Press ◄ or ► to improve display quality. Press Enter to save the setting or ESC to
cancel the change. Figure 23 shows the Set Contrast Screen.
SET CONTRAST
< > TO ADJUST
ENTER TO SAVE
███████
Figure 23 – Set Contrast
5.11. About Screen
Figure 24 shows the About Screen. The About Screen shows the firmware version and
programmable logic version on the second line. Press ▲ or ▼ to toggle between the
two version numbers. The serial number is shown on the third line.
BT-610
80203 R0.1.0
SN A10000
www.metone.com
Figure 24 – About Screen
6. Data Menu
To access data options (copy data, view available memory, recall data and print data),
simply press the Data key to navigate to the Data Screen. Figure 25 shows the Data
Screen.