User guide

BT Converse 1400 – Edition 4 – 22.12.05 – 7097
No dial tone
■ Is the line cord plugged into the phone socket?
Nothing happens when you dial
■ Check the dialling mode switch is set to the correct position. Page 7.
Phone does not ring
■ Is the ringer volume set to Off? Page 19.
You may have too many phones, fax machines and/or answering machines plugged in
which might be overloading the sockets. See Technical Information,
page 32.
Either the Line 1 or Line 2 light flashes constantly
■ The telephone cord for that line is unplugged.
Help 28