User Manual

©Copyright LOTRONIC 2016 PARLED710 4
51~57 Corresponding to AU01 Mode
58~63 Corresponding to AU02 Mode
64~69 Corresponding to AU03 Mode
70~75 Corresponding to AU04 Mode
76~82 Corresponding to AU05 Mpde
83~88 Corresponding to AU06 Mode
89~94 Corresponding to AU07 Mode
95~100 Corresponding to AU08 Mode
101~150 Corresponding to gradua
l mode, (EE01~EE99) CH6 adjust the speed
151~200
Corresponding to pulse mode, (CC01~CC99) CH6 adjust the speed
201~250
Corresponding to jump change(FF01~FF99), CH6 adjust the speed
250~255 Corresponding to Sound Mode 2
The program can detect the DMX signal automatically. If the unit detects a DMX signal or slave signal, the unit will
automatically switch into DMX Mode or slave mode.
REMOTE CONTROLLED OPERATION
Fixture Cleaning
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light
output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty
surrounding can cause greater accumulation of dirt on the unit’s optics.
• Clean with soft cloth using normal glass cleaning fluid.
• Always dry the parts carefully.
• Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling
centre. Ask your local authorities or your dealer about the way to proceed.