User manual

- 95 -
PS-8810
DIGITAL SIGNAL PROCESSOR
CobraNet
®
Output
The transmit Bundle is assigned in the window and a unique
priority can also be assigned for each Bundle. This Bundle Priority
is used by the Conductor to assign a transmit position on the
CobraNet network. Audio Bundles are sent on the network in a
synchronous fashion dictated by the Conductor. The Conductor
assigns a position to each transmitting Bundle in the network based
upon that Bundle’s Priority. At the start of a synchronous cycle, the
Conductor tells the highest priority Bundle to transmit, then each
successive Bundle transmits based upon its assigned Position. The
‘Receiver Count’ for each Bundle tells how many receivers, i.e.
other devices on the network, are listening to that Bundle.
synchronous cycle, the Conductor tells the highest priority Bundle
to transmit, then each successive Bundle transmits based upon its
assigned Position. The 'Receiver Count' for each Bundle tells how
many receivers, i.e. other devices on the network, are listening to
that Bundle.