Soundweb London BLU-800/BLU-805/BLU-806/BLU-320/ BLU-325/BLU-326/BLU-160/BLU-120 Installation Guide TM 5041131-B
IMPORTANT SAFETY INSTRUCTIONS WARNING FOR YOUR PROTECTION READ THE FOLLOWING: READ THESE INSTRUCTIONS. KEEP THESE INSTRUCTIONS. HEED ALL WARNINGS. The symbols shown above are internationally accepted symbols that warn of potential hazards with electrical products. The lightning flash with arrowpoint in an equilateral triangle means that there are dangerous voltages present within the unit.
IMPORTANT SAFETY INSTRUCTIONS ELECTROMAGNETIC COMPATIBILITY This device complies with part 15 of the FCC Rules and the Product Specifications noted on the Declaration of Conformity. Operation is subject to the following two conditions: • this device may not cause harmful interference, and • t his device must accept any interference received, including interference that may cause undesired operation. Operation of this unit within significant electromagnetic fields should be avoided.
CONSIGNES DE SÉCURITÉ IMPORTANTES AVERTISSEMENT POUR VOTRE SÉCURITÉ LIRE ATTENTIVEMENT : LIRE CES CONSIGNES. CONSERVER CES CONSIGNES. RESPECTER TOUS LES AVERTISSEMENTS. SUIVRE TOUTES LES CONSIGNES. Les symboles illustrés ci-dessus sont des symboles acceptés internationalement qui avertissent des dangers potentiels relatifs à l’utilisation de produits électriques. Le voyant clignotant avec une flèche dans un triangle équilatéral signifie la présence de tensions dangereuses dans l'appareil.
CONSIGNES DE SÉCURITÉ IMPORTANTES COMPATIBILITÉ ÉLECTROMAGNÉTIQUE DÉCLARATION DE CONFORMITÉ Cet appareil est conforme au volet 15 des règles du FCC et aux spécifications techniques évoquées dans la Déclaration de conformité.
Table of Contents Regulatory Information ��������������������������������������������������������������������������������������������������� 1 Product Registration/Warranty ��������������������������������������������������������������������������������������� 1 Important User Information ������������������������������������������������������������������������������������������� 1 Mechanical Installation ��������������������������������������������������������������������������������������������������� 1 Fr
Regulatory Information An example of this equipment has been tested and found to comply with the following European and international Standards for Electromagnetic Compatibility and Electrical Safety: Radiated Emissions (EU): EN55022:2006 Immunity (EU): EN55024:1998 Electrical Safety (EU): IEC60065-01 + AMD2 Electrical safety (USA): UL60065-06 Product Registration/Warranty To register your product, please visit http://bssaudio.com/en-US/support/warranty_registration.
Front Panel Input Card Monitoring Each channel has 3 LED indicators showing: • Clip Illuminated–Indicates clipping in the analogue domain for each channel of the fitted Input or Output card. The LED will illuminate at +18.5dB. • Signal Illuminated–The Signal LED will illuminate for each channel of a fitted Input or Output card when the signal reaches or exceeds the signal threshold of -20dB.
Rear Panel CAUTION: TO REDUCE THE RISK AVIS: MANUFACTURED IN THE USA BY BSS AUDIO PRIMARY SECONDARY CobraNet 4 IN BLU link OF FIRE REPLACE ONLY WITH THE SAME TYPE AND RATING OF FUSE T1.6AH - 250V FUSE UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE 100-240V ~ 50/60Hz, 55W THIS EQUIPMENT MUST BE EARTHED IN OUT 3 2 1 S S S S S S S S RS232 ETHERNET WORD CLOCK 3 2 1 S S S S S S S S D OUT LOCATE 4 B A C BLU-800 shown above. BLU-320 layout is identical.
Locate Pressing the Locate switch on the rear of the unit will illuminate the Locate switch on the front and identify the device within London Architect. Similarly the switch will illuminate if the device is selected from within London Architect or from the Locate switch on the front panel. RS232 The serial port allows 3rd-party control equipment to control and monitor the Soundweb London.
I/O Card Positions A, B, C & D 4 3 2 1 S S S S S S S S 4 B 3 2 1 S S S S S S S S D A C These connectors provide the balanced connections for the I/O card fitted in the four card slots in a Soundweb London device. The analogue connections are balanced, on Phoenix/Combicon connectors. A green LED next to the slot assignment letter A, B, C or D indicates that an Input card is fitted and an amber LED when an output card is fitted.
Logic Outputs There are 6 logic outputs, also known as “General Purpose Outputs” or “GPO”. They are used to control LED’s or relays. The logic output can source 10mA at 5V DC, or sink 60mA up to 50V DC. A high sensitivity relay (such as a reed relay) can be driven by connecting multiple logic outputs in parallel. In the diagram to the right, this arrangement will develop 4V across a 500-Ohm coil, providing that all four outputs are activated simultaneously.
Technical Specifications FRONT PANEL LED INDICATORS Input/Output: Per Input: Signal Present, CLIP, SYNC/48V, I/O card type [IN, OUT, DIG, AEC[BLU-800, BLU805, BLU-320, BLU-325, BLU-160, BLU-120]] Other: LCD Display, Conductor active, Net Link active, Data Activity ANALOGUE INPUTS Connectors: Up to 16 electronically balanced on Phoenix/Combicon removable screw connectors Mic/Line Inputs: Nominal gain 0dB, electronically switchable up to +48dB, in +6dB steps Input impedance: 3.
ANALOGUE OUTPUTS Connectors: Up to 16 electronically balanced on Phoenix/Combicon removable screw connectors Output Impedance: 40 Ohms balanced, 20 Ohms unbalanced Maximum Output Level: +19dBu Frequency Response: 20Hz to 20kHz [+0.5/-1dB] THD: <0.01% [20Hz to 20kHz, +10dBu output] Dynamic Range: 108dB typ. [22Hz to 22kHz unweighted] Crosstalk: <-75dB D/A Latency: 28/Fs [0.58ms@48k, 0.
POWER/TEMPERATURE Mains Voltage: 100-240V AC, 50/60Hz Power Consumption: <35VA [BLU-80, 32, 16]; <55VA [BLU-800, 805, 806, 320, 325, 326, 160, 120] BTU Rating: <120 BTU/hr [BLU-80, 32, 16]; <188 BTU/hr [BLU-800, 805, 806, 320, 325, 326, 160, 120] Operating Temperature Range: 5[41] to 35[95] degrees C[degrees F] BSS Audio incorporates high quality mechanical fans in some products. All mechanical fans have a limited life expectancy.
Phone: (801) 566-8800 Website: bssaudio.com Support: bssaudio.
