User Manual

How to connect wifi to your frame.
When you connect Wi-Fi to the frames ,please choose the available 2.4GHz network,the
frame can automatically recognize the wifi .
If the wifi shows [disabled],please choose the disabled wifi to choose the button
[forget]to reconnect the wifi again.
Step3.
It will pop up the message"waiting for confirmation".Tap the refresh button at the upper right
of the interface
Step4.
Start to send pictures via BSIMB PHOTO APP.
Tap [Files] in user interface. Choose [Photo] or [Video] and check the picture or video you want to
share. Then tap [Sure] to confirm your selection and choose [Devices] that you want to upload.
Tap the upper right button to send it. After process of sending is completed. A pop up message
[Sent successfully] will show on your smart device. You can check post history by tapping
[Messages] in user interface.