Instruction Manual

7
|
www.bs-battery.com
Select Input
CCA
1/10
Setting Rate
500 CCA
It takes around 3 seconds to display the battery test result.
BATTERY TEST RESULT
Battery test result includes 5 types as following:
Status >60% Voltage >12.4V Good battery
Status >60% Voltage <12.4V Good, Recharge
Status <60% Voltage >12.4V Replace
Status <60% Voltage <12.4V Charge, Retest
Status = 0
Voltage <12.4V,
Electric Current = 0A or 0 CCA
Bad cell , replace
1. GOOD BATTERY 2. GOOD, RECHARGE
Status: 96% 490CCA
Charge: 98% 12.64V
Internal R = 6.1mΩ
Rated: 500A
Battery OK
Status: 78% 440CCA
Charge: 30% 12.20V
Internal R = 7.2mΩ
Rated: 500A
Good, Recharge
3. REPLACE 4. BAD CELL, REPLACE
Status: 46% 490CCA
Charge: 8 0% 12.68V
Internal R = 18.1mΩ
Rated: 500A
Replace
Status: 0% 0CCA
Charge: 20% 10.64V
Internal R = 45.2mΩ
Rated: 500A
Damaged , Replace
5. CHARGE, RETEST
Status: 39% 310CCA
Charge: 20% 12.08V
Internal R = 30.1mΩ
Rated: 500A
Charge & retest
CRANKING TEST
Cranking test is the Engine ignition test. This test allows to check if the battery can provide
enough power to start the engine. It tests the battery instant voltage once start the engine.
If cranking voltage value is lower than 9.6V, the result is considered as abnormal.
If the result is higher than 9.6V, the result is considered as Normal.