User's Manual

reset
Getting Started6
Step 1: Charge your Rider 310
Connect Rider 310 to a PC to charge the battery for at least 4 hours.
Unplug the device when it is fully charged.
Step 2: Turn On Rider 310
Press and hold to turn on the device.
Step 3: Initial Setup
When turning Rider 3
instructions to complete setup.
1. Select the display language.
2. Read and accept the Safety Agreement.
* You may see a white screen when the battery is really low.
Keep the device plugged for several minutes, it will automatically turn-on after battery is properly charged.