User's Manual

40
Cardio 40/60 User’s Manual
NOTE:
Align both sensor and magnet as shown in the illustration (3) and (4). Pay attention on the •
alignment points.
Ensure the distance between the sensor and the magnet is within 3 mm.•
On the initial usage, do the following:•
1. Press the
button. The LED blinks from red to green, indicating the sensor is working.
2. Start pedaling.
3. When the cadence magnet comes across the sensor, the red LED blinks. When the speed
magnet comes across the sensor, the green LED blinks.
4. The LED blinks only for the rst 10 passes after pressing the
button.
5. If you want to check the alignment status after 10 passes, just press the
button and
repeat step 1to 4.