BR2 MULTI-MODEL INFRA-RED REMOTE CONTROL OWNER’S MANUAL 2008-10-31
BR2 HANDHELD INFRA-RED REMOTE CONTROL for use with the following Bryston models: • BCD-1 CD player • BDA-1 Digital-to-Analog Converter • B60R Integrated Amplifier / BP6 Preamp • B100 Integrated Amplifier / BP16 Preamp • BP26 Preamp FEATURES: ● ● Powered by two “AAA” batteries. Replace battery by removing bottom cover plate by removing the four Philips screws on the rear of the remote unit. Automatic motion-sensing backlight.
PROGRAMMING THE BCD-1 via the BR2 REMOTE CONTROL: Press the CODE button on the remote control until the red LED lights and then enter the 3 digt code as listed below. The LED will flash to confirm transmission and then extinguish. 242: To enable toggling the display ON or OFF. After entering code 242 the zero button can be used to toggle the display on or off.
APPLICABLE KEYS FOR VARIOUS MODELS BRYSTON LIMITED WARRANTY Bryston analog audio circuits are warranted to be free from manufacturing defects for twenty (20) years from the original date of manufacture. The warranty includes parts and labour. Bryston Digital circuits and cables are warranted for five years from the original date of manufacture. The warranty includes parts and labour.
