Specifications

Appendix G  Technical Specifications
A Sicherungs Nenndaten (Fuse rating: ) 1.5 A 250VAC.
Warnung: Fuer kontinuierlichen Feuerschutz, sollten diw Sicherungen nur mit einer gleichen
Typs und der gleichen Einstufung ersetzt werden.
Achtung: Zweipolige bzw.Neutralleiter Sicherung.
Media Size
Media Thickness
Minimum Maximum
0.003 inches(0.0762 mm) 1/9” (3.000 mm)
Paper Extents Width Length
Minimum
3” (76 mm) 5” (127 mm)
Maximum
12.5” (330 mm) 15” (390 mm)
Environmental Conditions.
Operating. (Power On.), Temperature. 55.F - 95.F (12.C - 35.C),
Humidity. 8% - 80%
Die maximale Umgebungstemperatur betraegt 35C.
Non Operating. (Power Off.), Temperature. 42.F - 100.F (5.C - 40.C),
Humidity. 10% - 90%
Noise Level. Sound Level: Less than 65 dBA (re 20µPa), A-weighted
sound pressure level at the operator position. Measured in
accordance with applicable ANSI and ISO standards.
Maximum Printing Area
Vertically Horizontally
15 inches (38.1 cm) 9.4 inches (23.8 cm)
Print Density and Resolution. Black Color
Draft:- 300 x 300 Dots per inch. - Light. 300 x 150 Dots per inch
Letter:- 300 x 600 Dots per inch. - Medium. 300 x 300 Dots per inch
Executive:- 600 x 600 Dots per inch. - Dark. 600 x 300 Dots per inch
Maximum Point Size
Smallest Largest
4 point 30 point
Printer Speed
Bryce 9K-LC
Based on 18 characters per line, 10 point, 3 lines per address and no barcode.
Media Draft Letter Executive Margin
# 10 9000 8,000 7,000 5 inch (12.7 cm)
Revision A 9K-LC USERS MANUAL Section G - 3
P/N 90-00870-001