Specifications

Appendix F  Printing with Software
Revision A 5K-LE OWNERS MANUAL Section F - 22
Software interface sample: MailMiser ver 1.2
Refer to the MailMiser User's Guide to setup a database for printing labels.
While using MailMiser, a label must be defined in order to print your addresses on the BOS 5K-
LE.
Select System/Printer Functions (9) from the Main Menu.
The System/Printer Function Menu will be displayed.
Select Printer Selection (3).
The Print Selection Menu will be displayed.
Select BRYCE BOS 12K.
You will be returned to the System/Printer Functions Menu.
Enter data according to the following table.
1. Function "Typing" Keys
2. Rebuild Indexes
3. Printer Selection
Bryce BOS 12K
4. Reset Printer
Yes
5. Special Printer Codes
6. Default Directory
7. Color/Monochrome enter monitor type
8. Delivery Point Barcode
NO
9. Printer passes for Barcode
1
0. Exit to Main Menu
Select Exit to Main Menu (0), after you have entered the above data.
The MailMiser Main Menu will be displayed.
Select Label/Envelope Sizes (8).
Select Choose from standard label sizes (1).
Select Direct Image Printer, 1 up, 0 margin.
MailMiser will ask you if you want to Print a Test Pattern, select NO at this time, this will return
you back to the Main Menu.
Select Label/Envelope Sizes (8).
Select Edit current label size (2).
Enter data according to the following table.
Label Description
Direct Image Printer, 1 up, 0 margin
Label Width
4.5
Left Margin
0
Inches from top of 1 label to top
of next label
1.167 (for a 7 line address)
approx. .167 per line, at 6 lpi
Number of Labels across
1
Number of Spaces Between Labels
0
Lines Per Inch
6 lpi (default)
Characters Per Inch
10 cpi (default)
Select Print Labels from the Main Menu to print addresses.
NOTE: Select
NO when the program asks you if you want to print Postnet Barcode.
P/N 90-00852-001