Specifications

Introduction
This manual is for the person who is new to the Bryce 5K-LE
Address Printer and needs step by step instructions to setup and
operate the printer.
Who is this
manual for?
The appendix at the end of the manual has information for those
who are familiar with the 5K-LE printer and simply want a quick
reference or want more specific technical information on the 5K-LE
printer.
Section 1 - Unpacking
A list of the components that came with your new printer.
Section 2 – Parts of the Printer
Introduces you to the printer and where components are found.
Section 3 – Setting up the Printer
Describes the basics of how to setup and install the components of
the printer for the first time.
Section 4 – Trying out the Printer
Step by step instructions to operate the address printer and some
adjustments to maximize the performance of the printer.
Section 5 – Cleaning and Maintaining the Printer
General maintenance steps to keep the printer clean and functioning
properly.
Section 6 – Printer Menu System
Explains each of the menu options of the address printer.
Section 7- Troubleshooting and Diagnostics
A list of possible problems you may encounter when operating the
printer and their solutions.
Appendices
The appendices include a quick reference table for the 5K-LE
menus, a listing of the PCL commands the printer recognizes, a hex
chart to help work through a HEX dump, and references of setting
up the most popular software to work with the printer. The final
section has a list of supplies available for your printer.
Revision A 5K-LE OWNERS MANUAL
P/N 90-00852-001
1