Specifications

ManualsBrandsBryce ManualsComputer equipment5K-LE

Appendix C  PCL Command Codes

PCL parameterized escape sequences

Printer Feature Printer

Command

HEX

Equivalent

DEC Equivalent Description

Start Raster

Graphics

Å*r#A

0 1B 2A 72 30 41 027 042 114 048 065 Place to left most position

1 1B 2A 72 31 41 027 042 114 049 065 Place at current position

End Raster

Graphics

Å*rB 1B 2A 72 42 027 042 114 066

Å*rC 1B 2A 72 43 027 042 114 067 Resets left margin to 0

Set Raster

Graphics Width

Å*r#S 1B 2A 72 #..# 53 027 042 114 #..# 083 Set number of pixels

Set Raster

Graphics Height

Å*r#T 1B 2A 72 # 54 027 042 114 # 084 Height is raster rows

Simple Color

Å*r#U

Black pallet 1 1B 2A 72 31 55 027 042 114 049 085 1 plane

Raster Graphics

Resolution

Å*t#R

75 1B 2A 72 37 35

027 042 116 055 055 082 75 dots per inch

150 1B 2A 72 31 35

30 52

027 042 116 049 053 048

082

150 dots per inch

300 1B 2A 72 33 30

30 52

027 042 116 051 048 048

082

300 dots per inch

c The Page Width & Page Length printer commands function like the Page Size command. Using these

commands automatically enables Page Eject and disables overlay macros. Both the Page Width and Page

Length commands can be used independently and will only change the width or length to the maximum

allowable page size of 9.4 x 15 inches (23.9 x 38.1 cm). Setting the cursor positioning commands, margin

settings, print data, etc. to cause printing beyond the pages size dimensions will be cropped.

d Only one overlay macro can be used at a time, and cannot be recursive. The overlay macros need print

quality, page parameters, etc. to determine the printers’ page setup.

e Soft font creation is in HP non compressed Bit Map Font Format.

h The resident fonts are scaleable from 8 to 30 points. If a desired font spacing does not match the font

selected an internal font will be substituted. For fixed spacing the substitute font will be Courier, and Sans Serif

for proportionally spaced fonts. Characteristics of the font being replaced, such as point size, print width, etc.,

will be matched by the substituted font.

Revision A 5K-LE OWNERS MANUAL Section C -

P/N 90-00852-001