Specifications

Printer Menu System
4. TEST PAPER MOTOR
Use the test paper motor option to help determine if the motor or paper feeding system is not functioning
properly i.e. rollers not turning, strange noises, etc.
Selections Explanation
Press the [+] Plus button to move
the media 1 inch (2.54 cm). Press
the [-] minus button to move the
media 1/150 of an inch (0.017
cm).
The test paper motor option tests the feeding mechanism of the
printer by controlling the transport motor. The transport motor will
feed the paper through the printer in small increments 1/150 inch
(0.017 cm) or in large increments 1 inch (2.54 cm).
5. TEST DISPLAY
Use the test display option to help determine if the LCD display is not functioning properly i.e. missing
characters, strange characters, missing segments, etc.
Selections Explanation
Press the [Enter] button to select
this option. As soon as, the
[Enter] button is pressed, the
printer will be in the test mode.
The test display will scroll characters across the top and bottom of
the LCD display.
EXAMPLE:
The LCD display will scroll the lower case alphabet and numerals (0-
9) across the top line, while the bottom line will scroll control
characters and the numerals. The Test function will cycle twice and
return to the Service Menu. See example below for LCD display
sample test message.
Example of LCD display with
characters scrolling across
abcdefghijklmnopqrstuvwxyz 0123456789
\->!#$%&*()_+- =[]:;'<>/? 0123456789
6. ENV. (ENVELOPE) BOTTOM EDGE
Utilize this option if the bar-code is out of specification ( 1/4 inch (0.635 cm) from the bottom edge of the
media to the bottom edge of the Bar-code [+/- 1/16 inch or +/- 0.159 cm]).
Selections Explanation
0 to 50
Press the [Test Env.] button to
print a test pattern. Press the
This option will raise or lower the print from the bottom edge of the
envelope.
Adjust the bar-code Bottom Edge Distance by increasing or
Revision A 5K-LE OWNERS MANUAL Section 6 - 16
P/N 90-00852-001