Specifications

2
Overview
Using This
Guide
Refer to this guide for information about printer setup, op-
eration and troubleshooting. It is organized as follows:
Chapter 1, Overview
Contains an overview of the SA5300 Operator Guide, infor-
mation about obtaining supplies and help, Safety informa-
tion and component identification.
Chapter 2, Setting Up
Contains instructions for unpacking, assembling and con-
necting your printer.
Chapter 3, Printer Basics
Explains how to set up your printer to run a job.
Chapter 4, Using the SA5300 With Your Computer
Contains instructions for installing the printer driver, se-
lecting the printer from your software program and sending
a mail job from your computer. This section also contains
instructions for setting printer preferences.
Chapter 5, Printer Maintenance
Describes how change and look after Print Cartridges and
how to keep the printer clean and functioning properly.
Welcome to
the SA5300
Printer
The SECAP™ SA5300 ink jet printer is used to print ad-
dresses, graphics and other information, on a wide range
of material of various sizes, construction and composition.
With the SA5300 you can define the font, placement, print
quality and barcode characteristics for your addresses.
This Operator Guide shows you how to:
• Set up the SA5300 printer
• Connect it to your computer
• Define your envelope layout
• Print a test mail piece
• Send a mail job to the printer from your computer
application.