Specifications

6
Troubleshooting Your Printer
Other
Problems
Problem Motor Turning but no Feed Roller Move-
ment
Reason: Mechanical problem.
Solution: Call SECAP™ for Service.
Problem Out of Memory
Reason: The printer can run out of memory when
downloading fonts or graphics.
Solution: This generally means you’re trying to use a
graphic (artwork) that’s too big or you have
too many fonts or too large a font size. If
the out-of-memory message appears, try
reducing the size of your art and limiting the
number and size of your fonts. Then turn
the printer OFF, then ON and retry.
Motor
Problems
Interface
Problems
Problem No Communications; Printer Does Not
Respond
Reason: Incorrect print driver, bad parallel or USB
cable, bad printer controller board.
Solution: Use SA5300 print driver; replace parallel or
USB cable. Make sure cable connections
are tight. If the problem still persists, call
SECAP™ for service.
Clear memory (see page A-3).
Cycle power (turn printer off, then on).