Specifications

8
Basics
7. Adjust the Media Thickness Knob
The media thickness knob sets the distance between the
Print Heads and the material. Use it to compensate for
different material thicknesses and to increase clarity of the
printing.
Estimate the thickness of the material to be run.
NOTE: All material in a run must be the same thickness.
For 1/16" (1.5mm) thick material, start half way. For 1/8"
(3mm) thick material, start with setting all the way at the
Thick side (clockwise).
Setting
Up A Job
(continued)
Thick
Material
Thin
Material
IMPORTANT! Adjusting the media thickness knob too far
counterclockwise may cause smearing or jamming.
2. While running test samples, close the gap (turn knob
anticlockwise) until the desired quality of printing is
obtained.