Specifications

In this chapter you'll learn about key
features of the SA5300 printer and
how to adjust it to meet the require-
ments of your material.
In this chapter:
Setting Up A Job ............................3-2
1. Set the Separator Gap .............3-2
2. Center the Feed Ramp
Under the Material ...................3-4
3. Set the Feed Angle ..................3-5
4. Set the Feed Ramp Length .....3-5
5. Position the Side Guides .........3-6
6. Load Material ...........................3-7
7. Adjust the Media
Thickness Knob .......................3-8
8. Output Stacker .........................3-9
9. Print a Test Piece .....................3-9
10. Set the Print Head
Position ..................................3-10
11. Adjust the Takeaway Rolller
Tension .................................. 3-11
Chapter
3
Printer Basics