Specifications

9
Setup
6. Connect the Power Cord and Turn ON
A. Make sure that the
power switch is turned
OFF (0), then connect
the power cord to the
printer.
B. Plug the power cord
into a grounded outlet.
Please review the safety
information on pages
1-5 and 1-6.
Assembling
the Printer
(continued)
Power switch
Power plug and receptacle
Parallel cable and power cord
connections
USB cable and power cord
connections
Once you've connected the cable, press the printer’s
power switch to the “I” (ON) position. The switch is located
next to the power cord receptacle.
When you turn the printer on. The LCD menu displays that
the printer is initializing. After a few seconds, the printer will
automatically go "ON LINE".
You can tell if the printer is ON LINE, by looking at the indi-
cator light above the ON LINE key. When the printer is ON
LINE, the indicator will be lit.