Specifications

Printer Menu System
E. Head 2 side
to side
F. Head 3 Side
to Side
G. Head 5 Side
to Side
H. Head 6 side
to side
01 to 99
Press the [Test] button
to print out a Test
Pattern. Check the
Test Pattern to
determine which Print
Cartridges are in need
of horizontal
Synchronization.
Use the options E through H to horizontally
synchronize the individual Print Cartridges in Bank
A or Bank B.
When a line of print is split apart or the left edge of
a block of lines don’t line up with the left edge of
the other lines the Print Cartridges have to be
synchronized horizontally. Perform a horizontal
adjustment whenever the wide solid line and the set
of 18 thin vertical lines do not form long vertical
lines for the whole bank of Print Cartridges.
The following is an example of how to synchronize Print Cartridges for Bank A. The same techniques
used for Bank A can be applied to Bank B.
Example:
Print out an adjust print Test Pattern by pressing the
[Test] button while in the Adjust Print menu. The
printer will print a Test Pattern like the example on
the right.
Head 3 Bank A
Head 2 Bank
A
Head 1 Bank A
In the example to the right the wide vertical line on
the left and 18 thin vertical lines indicate Print
Cartridge #2 needs a horizontal print adjustment. The
example shows Print Cartridge #2 is to far to the
right.
Scroll through the Adjust Print menu options until the HEAD 2 SIDE TO SIDE option is displayed on the
LCD panel. Select this menu item to change the settings.
Press the [-] button to scroll the values down and move Head 2 left.
Head 3 Bank
A
Head 2 Bank
A
Head 1 Bank
A
Press the [Enter] button to select the desired value. An Asterisk (*) will appear in front of the new
selection.
Press the [Test] button to print another Test Pattern.
This time the Test Pattern is printed using the
entered selection.
When the correct numeral is selected the wide line
and the set of 18 vertical lines form long vertical
lines down the entire Bank A of Print Heads.
Revision C 30K USERS MANUAL Section 6 - 18
P/N 90-00203-001