Specifications

Printer Menu System
8. CONVEYER TIME
This item increases the length of time the conveyer will stay on. Generally, when the print
quality is set higher than draft, and / or, print width is larger than normal, the drying time of
printed records must be increased to prevent smearing or smudging of addresses. Special
consideration of ink drying time and media handling for glossy or tyvek media should also be
considered when using a conveyer.
Menu Items Selections Explanation
0.00 to 2.00
seconds
This item modifies the amount of time the conveyer
continues to run after printing a record. Changing
the time for the conveyer to remain running alters
how the media is shingled on the conveyer.
Use a 5 volt DC relay switch or a Bryce Pulse Box inline with the Accessory Port and the Conveyer
when connecting to the 5 VDC line [Pin 3] and the Conveyer Signal line [Pin 2]. Reference the Schematic
for the pins to use when connecting to the Conveyer Port. (See Section K for ordering information)
9. IMAGE OVERLAY
This menu item is used in conjunction with the Overlay Printer Driver. Use this option to print
redundant text or graphics in the same location on every piece. The Image Overlay option is best
used for printing a company logo and return address.
Menu Items Selections Explanation
A. First Image
Overlay
Enable or Exit This option saves the very first record or graphic
received into the printers’ memory as an overlay.
B. Clear
Overlay
Press [Enter] to
Clear or Exit
This option clears the overlay data in the printers’
memory.
C. Print
Overlay First
Enable or Disable This option prints the data sent for the overlay onto
the first piece. Use this piece to verify the location
of the overlay is correct.
Revision C 30K USERS MANUAL Section 6 - 8
P/N 90-00203-001