Specifications

Printer Menu System
4. BARCODE
Use this option to print a USPS (US Postal Service Postnet Barcode) barcode on the piece of
media and to place it above or below the record. Note: A CASS certified mailing program is
recommended when generating a USPS barcode. The requirements to print a USPS barcode are
shown in Appendix H.
Menu Items Selections Explanation
A. Location Above Address
Below Address
Off
Select the US Postal Service Postnet Barcode
options from the following selections:
ABOVE ADDRESS: Prints the barcode in the
address block above the first line of the address on
the media.
BELOW ADDRESS: Prints the barcode below the
last line of the address in the address block on the
media.
OFF : Stops the printing of a Delivery Point
Barcode (DPBC) on the media.
Note: This option has the printer generate the USPS
barcode.
B. 5 Digit
On/Off
On or Off This item prints a 5 Digit barcode for a five digit zip
code. Note: Only a 5 Digit barcode is printed for a
five digit zip code when enabled. A Delivery Point
Bar Code cannot be generated from a five digit zip
code.
C. Bar Width
6 to 12 This item will increase the width or decrease the
width of the bars generated for the USPS Postnet
and Planet barcodes. Select this item to counteract
the variance in the barcodes due to material, print
quality, inks, etc.
5. ADDRESS RECOVERY
When something goes wrong while printing use this option to direct the printer to re-print up to
99 of the last records or to clear the printers memory of all records.
Menu Items Selections Explanation
A. Get
Addresses
NONE TO RECOVER
or
00 to 99
Press the [Enter]
button to select the
This option retrieves up to 99 records from the data
buffer.
The display will say 00: and show the first 16
characters of the last address printed. If NONE TO
RECOVER is first displayed then the data buffer is
Revision C 30K USERS MANUAL Section 6 - 6
P/N 90-00203-001